New and novel organic–inorganic type crystalline ‘polypyrrolel/polyantimonic acid’ composite system: preparation, characterization and analytical applications as a cation-exchange material and Hg(II) ion-selective membrane electrode Original Research Arti

A new phase of ‘organic–inorganic’ composite system, polypyrrole polyantimonic acid, prepared by mixing the inorganic precipitate of hydrated antimony oxide with organic conducting polymer i.e., polypyrrole, providing a novel granular form hybrid cation-exchanger suitable for column operation with better chemical and thermal stability, good ion-exchange capacity, reproducibility and selectivity for heavy metals. The physicochemical properties of this material were studied using elemental analyses, AAS, SEM, XRD, FTIR and simultaneous TGA-DTA studies. Ion-exchange capacity, pH-titrations, elution and distribution behavior were also carried out to characterize the material. Distribution studies revealed the cation-exchange material to be highly selective for Hg(II) and its selectivity was performed by achieving some important binary separations like Hg2+–Zn2+, Hg2+–Ni2+, Hg2+–Cu2+, Hg2+–Fe3+, Hg2+–Cd2+, Hg2+–Mg2+ etc. on its column. Using this electroactive composite material, a new heterogeneous precipitate based selective ion-sensitive membrane electrode was fabricated for the determination of Hg(II) ions in solutions. The membrane electrode is mechanically stable, with a quick response time, and can be operated within a wide pH range. The selectivity coefficients for different cations determined by mixed solution method were found to be less than unity The electrode was also found to be satisfactory in electrometric titrations.