Toughened carbon/epoxy composites made by using core/shell particles

Toughened epoxy resin composites have been prepared by resin-transfer moulding by using a range of toughening agents. Two types of epoxy-functional preformed toughening particles were investigated and have a three-layer morphology in which the inner core is crosslinked poly(methyl methacrylate), the intermediate layer is crosslinked poly(butyl acrylate) rubber and the outer layer is a poly[(methyl methacrylate)-co-(ethyl acrylate)-co-(glycidyl methacrylate)]. The presence of glycidyl groups in the outer layer facilitates chemical reaction with the matrix epoxy resin during curing. Comparisons were made with acrylic toughening particles that have a similar structure, but which do not have the epoxy functionality in the outer shell, and with a conventional carboxy-terminated butadiene acrylonitrile (CTBN) liquid rubber toughening agent. The composites were characterised by using tensile, compression and impact testing. The fracture surfaces and sections through the moulded composites were examined by means of optical and scanning electron microscopy. Short-beam shear tests and fragmentation tests were used to investigate the interfacial properties of the composites. In general, use of the epoxy-functionalised toughening particles gave rise to superior properties compared with both the non-functionalised acrylic toughening particles and CTBN.