Thermo-hydraulic predictions for multi-pass evaporators by orthogonal collocation using a new flow pattern map

A recently published paper by this author [S. Thyageswaran, Analysis of multi-pass evaporators using orthogonal collocation, Int. J. Refrigeration (in press)], shows that orthogonal collocation is an effective alternative to traditional integration for the thermal analysis of multi-pass evaporators. The steady rate of heat exchanged (Q) and overall pressure drop (Δp), for an R-22 based chiller having one shell and eight tube passes, were predicted using the Kattan–Thome–Favrat and the Müller-Steinhagen and Heck models for the boiling R-22. While Q was over-predicted by 0.95%, Δp was over-predicted by 20.3%. In the present work, results have been obtained using state-of-the-art, unified heat transfer and pressure drop sub-models based upon an improved flow pattern map by Wojtan et al. [L. Wojtan, T. Ursenbacher, J.R. Thome, Investigation of flow boiling in horizontal tubes, part 1: a new diabatic two-phase flow pattern map, Int. J. Heat Mass Transfer 48 (2005) 2955–2969; L. Wojtan, T. Ursenbacher, J.R. Thome, Investigation of flow boiling in horizontal tubes, part 2: development of a new heat transfer model for stratified-wavy, dryout and mist flow regimes, Int. J. Heat Mass Transfer 48 (2005) 2970–2985], and Moreno Quibén and Thome [J.M. Quibén, J.R. Thome, Flow pattern based two-phase frictional pressure drop model for horizontal tubes, part 1: diabatic and adiabatic experimental study, Int. J. Heat Fluid Flow 28 (5) (2007) 1049–1059; J.M. Quibén, J.R. Thome, Flow pattern based two-phase frictional pressure drop model for horizontal tubes, part 2: new phenomenological model, Int. J. Heat and Fluid Flow 28 (5) (2007) 1060–1072]. The new predictions for Q and Δp are 141.76 kW and 13.3 kPa, respectively, compared to their rated values of 140.67 kW and 13.789 kPa.