Influence of structural and preparation parameters of Fe2O3/Al2O3 catalysts on rate of production and quality of carbon nanotubes

The influence of catalytic and operational parameters on the rate of growth and quality of carbon nanotubes has been investigated. A series of Fe2O3/Al2O3 catalysts prepared by different methods were investigated under conditions of synthesis of CNTs via the process of CVD of ethylene. Deposition experiments were carried out in a thermogravimetric hot-wall reactor, which enables continuous monitoring of the evolution of carbon mass with time. Controlled explosive burning (CEB) of precursor compounds was found to be the most effective method of preparation of the catalyst with respect to rate of deposition and yield of CNTs. This result has been attributed to the presence of hematite particles of small diameter on the catalyst. The presence of hydrogen in the gas feed mixture, even at small concentration, proved to be beneficial for the rate of production of MWCNTs and to result in the synthesis of CNTs of narrower diameter distribution. Yield and quality of MWCNTs depend on the concentration of the carbon source (ethylene) in the feed mixture and on temperature of deposition. Under the present experimental conditions, the optimal reaction temperature was found to be 650 °C. The products of the deposition were characterized using scanning electron microscopy and Raman spectroscopy.