Performances of Hydraulics and Bedload Sediment Flushing in Rigid Channel Using Surge Flows

This paper presents an investigation of the performance of the hydraulic and sediment removal of a flushing system in a detention basin. A hydraulic criterion for the design of the flushing system is proposed. An equation for the maximum height of the flushing wave front as a function of the distance from the gate, the initial water depth in the chamber, and the chamber length is proposed. The Lauber and Hager equation for the maximum velocity of a flushing wave is also verified. Effective removal of sediment particles on the bed is a direct function of the bed shear stress generated by the flushing flow. This study reveals that the bed shear stress on the channel bed induced by the flushing flow can be attributed to the hydrostatic pressure, the flow acceleration, and the convection-induced momentum. The shear stress associated with fluid distortion and the turbulent viscosity may be neglected. Significant error would occur if the hydrostatic pressure component were used as an estimate of the bed shear stress on a mild slope channel. The energy slope method may provide an overestimate of the bed shear stress. Finally, an appropriate equation to evaluate the maximum bed shear stress is proposed.