Title of article :
Wear and friction characteristics of ion-implanted zirconia ceramics
Author/Authors :
G.B Stachowiak، نويسنده , , G.W. Stachowiak، نويسنده , , P Evans، نويسنده ,
Issue Information :
ماهنامه با شماره پیاپی سال 2000
Abstract :
Yttria-tetragonal zirconia polycrystals (Y-TZP) and magnesia-partially stabilized zirconia (Mg-PSZ) ceramics were implanted with ions of C or a combination of Ti+C using a metal vapour vacuum arc (MEVVA) ion implanter. Wear and frictional characteristics of ion-implanted Y-TZP and Mg-PSZ ceramic plates against unimplanted TZP and PSZ pins were investigated using a pin-on-plate reciprocating rig under two levels of load of 1.2 and 2.0 N and an average velocity of 0.1 m s−1. The effects of ion implantation on friction coefficients and wear rates have been explored by comparing the results with those of unimplanted self-mated zirconia ceramics. It was found that the friction coefficients of the Ti+C and C ion-implanted ceramics were lower than those of the unimplanted ceramics tested under the same conditions but the duration of low friction was short. The wear resistance of the C-implanted zirconia ceramics was significantly higher during the first 400–600 m of sliding (4×104–6×104 cycles) than that of the unmodified ceramics, especially at a lower load of 1.2 N. Ti+C ion implantation reduced the wear of TZP only slightly and did not affect the wear of PSZ ceramics due to a quite rapid removal of the implanted layer. The C-implanted layer persisted on the ceramic surfaces over a much longer sliding distance.
Keywords :
Ion implantation , Wear , friction , Zirconia ceramics