Author/Authors :
Schneider، Arland D. نويسنده , , Howell، Terry A. نويسنده ,
Abstract :
Two low energy precision application (LEPA) sprinkler methods (double-ended socks and bubblers) and two spray sprinkler methods (low-elevation spray application and overhead spray) were used to irrigate corn, grain sorghum, and winter wheat in the Southern High Plains. For full or 100% irrigation, sufficient 25mm applications were applied to maintain soil water at non-yield-limiting levels determined in earlier research with the three crops. Deficit-irrigated treatments were irrigated on the same days as the control treatment in 25 or 33% increments of the fully irrigated amount. Irrigation water was applied to or above alternate furrows with a three-span lateral move irrigation system. Corn and sorghum were grown on beds and furrows with all furrows diked, and wheat was flat-planted without basin tillage. Grain yields increased significantly with irrigation amount (p < 0.05) for all crops during all years. With full irrigation, grain yields varied little among the sprinkler methods, and yields averaged 13.5, 8.9, and 4.6 Mg/ha for corn, sorghum, and wheat, respectively. With the 25 and 50% deficit irrigation amounts, sorghum yields with LEPA irrigation were I.I Mg/ha larger than with the two spray methods. For 75% irrigation of sorghum and for deficit irrigation of the other two crops, there was little yield difference between the LEPA and spray sprinkler methods. Grain yields were significantly correlated with seasonal water use with regression coefficients of 2.89, 1.84, and 0.915 kg/m^ 3for corn, sorghum, and wheat, respectively.
Keywords :
fracture toughness , Microstructure , Fiber orientation , cellulose fiber