Friction and wear of blended polyoxymethylene sliding against coated steel plates

Measurements were made of the dynamic friction coefficients and specific wear rates of several thermoplastics rubbing against relatively soft coatings on steel plates. Polyoxymethylene (POM)-based composites were investigated using reciprocating, line contact tests against two types of corrosion-protected steel plates (electro-deposited cathodic epoxy layers, called “E-coatings”, and galvanised plates). In addition to virgin POM, composites containing glass fibres, polytetrafluoroethylene (PTFE) fibres, PTFE micro-powder, and high-viscosity silicon oil were investigated. Sliding speeds ranged from 0.05 to 0.3 m/s, and normal loads ranged from 5 to 30 N. The E-coating failed at high loads and velocities. The beneficial effects of lubricating additives in tests with uncoated steel counterfaces were also observed with the coated steel surfaces. POM with glass fibre additives was found to be more abrasive than the base material. The considered non-conformal contact produced similar friction and wear trends than those obtained for the conformal contact.