Filtration characteristics of activated sludge in hybrid membrane bioreactor with porous suspended carriers (HMBR) Original Research Article

The suspended carriers were efficient in controlling membrane fouling in hybrid membrane bioreactor with porous suspended carriers (HMBR). The purpose of this study consisted in investigating the effect of suspended carriers on the sludge suspension, especially the filterability of sludge suspension. The filterability of sludge suspension in HMBR and general membrane bioreactor (MBR) were investigated and compared in parallel conditions by dead-end filtration for better evaluating the influence of suspended carriers on the sludge suspension. Several aspects of sludge suspension such as filtration resistance, specific cake resistance and particle size were discussed. During long-term operation the filtration resistances rose gradually in the early stage (about 100 days) and then increased rapidly, but there was a slight difference between MBR and HMBR with the prolongation of operation time. The granulometric analysis revealed that the mean particle size of sludge suspension of HMBR decreased more sharply than that of MBR, because the fluidized carriers in HMBR would impose shear stresses on sludge flocs and induce the destruction of the network of sludge zoogloea. Dead-end filtration experiments indicated that the resistance-increasing rates of three portions of sludge suspension were in the order of supernatant > dissolved organics > microbial flocs. In order to further understand the filterability of sludge suspension, the specific cake resistance (α or α.C) of sludge suspension and supernatant in HMBR and MBR were determined. During long-term operation the α and α.C increased with operation time. These results revealed that the suspended carriers in HMBR had appreciably negative effect on the biological characteristics and filterability of the sludge suspension, but they were efficient in controlling membrane fouling during continuous operation of HMBR.