The effect of stirring speed and current density on removal efficiency of poultry slaughterhouse wastewater by electrocoagulation method Original Research Article

The aim of study is to investigate the effect of current density and stirring speed in the treatment of poultry slaughterhouse wastewater (PSW) using electrocoagulation with aluminum electrodes. In the experiments, initial pH and current density were chosen between 3 and 7, and 0.5 and 2.0 mA/cm2 respectively. The best removal efficiency has been obtained, when initial pH and current density were adjusted to 3.0 and 1.0 mA/cm2, respectively. Increasing current density values decreased COD removal efficiency. The highest removal efficiencies of 85, 85, 81 and 71% were obtained with the current density of 0.5, 1.0, 1.5 and 2.0 mA/cm2, respectively. Initial pH values of these removal efficiencies were 4.0, 3.0, 3.0 and 5.0. When experiments were performed to investigate the turbidity removal efficiency, it was found that current density of 1.0 mA/cm2 provided 98% removal efficiency. Results obtained from the experiments where stirring speed of 100, 150 and 250 rpm were used showed the removal efficiency of 85, 90 and 75% respectively with the current density of 1.0 mA/cm2. Results showed that electrocoagulation is a suitable method for treatment of PSW. Electrical conductivity of investigated wastewater was nearly 2860 μS/cm, which caused energy consumption to be relatively lower.