Influence of pore structure and surface chemistry on electric double layer capacitance in non-aqueous electrolyte Original Research Article

The performance as electric double layer capacitors (EDLC) in non-aqueous electrolyte of a series of alkaline agent-activated carbons with high surface area is presented in this work. The results obtained show that, in general, capacitance increases with surface area. However, the results obtained in this study confirm that capacitance not only depends on surface area, but also on two other parameters: pore size distribution and surface chemistry. It has been shown that capacitance is higher for a sample with wider micropore size distribution than for a sample with higher surface area but too narrow micropore size distribution. In addition, it has been observed that the sample with a very high amount of surface groups presents very high capacitance values. In the present study, a KOH-activated carbon with a capacitance as high as 220 F/g was prepared. Finally, the results obtained with a mesoporous sample have shown that the presence of mesopores in activated carbons with very high surface area (e.g. >2000 m2/g), do not seem to be effective for double layer capacitors.