Microstructures and mechanical properties of carbon/carbon composites reinforced with carbon nanofibers/nanotubes produced in situ Original Research Article

Using ferrocene as catalyst and toluene as the liquid precursor, carbon/carbon (C/C) composites were prepared by chemical liquid–vapor infiltration at 850–1100 °C. The microstructures and properties of C/C composites obtained with different ferrocene contents were studied. The results show smooth laminar and isotropic pyrocarbon are obtained after adding ferrocene to the precursor. Carbon nanofibers can be formed as the catalyst content is 0.3–1 wt.%. When the ferrocene content is 2 wt.%, multi-walled carbon nanotubes with the diameter about 20–90 nm are obtained together with carbon-encapsulated iron nanoparticles. After adding ferrocene to the precursor, the fracture modes of the composites change from brittle facture to tough fracture. The flexural strength of the composites is a maximum for 0.3 wt.% ferrocene in the precursor, higher than for ferrocene contents of 0, 0.5, 1 and 2 wt.%. The flexural modulus of the composites decreases after adding ferrocene to the precursor.