Experimental and numerical investigation of the position-dependent growth of carbon nanotube–alumina microparticle hybrid structures in a horizontal CVD reactor Original Research Article

The hybrid structures of carbon nanotubes (CNTs) and alumina microparticles were produced in a horizontal chemical vapor deposition (CVD) reactor using ferrocene/xylene/acetylene mixture as the catalyst–carbon source. At a given temperature and hydrogen ratio, the CNT diameter, number density, growth rate and their hybrid structures varied greatly along the axial direction of the reactor. This non-uniform growth is attributed to the position-dependent chemical reaction kinetics inside the reactor, mainly along the gas flow direction. Mass spectrometry was used to identify and quantify the chemical species of the exhaust gas. A numerical simulation of the reacting gas flow in the reactor was conducted in parallel by taking into account the space-dependent pyrolysis kinetics of the catalyst and carbon sources, the reactor temperature gradient and the fluid dynamics. A good agreement existed between the modeling and the experimental results. A double-end-injection method was proposed based on the above results, and the uniform hybrid structures were synthesized in a larger zone inside the CVD reactor. A new kind of CNT structure containing iron crystal particles at their two extremities was obtained under certain conditions, which can be very useful for various CNT junction applications.