Effect of processing technique on the transport and mechanical properties of vapour grown carbon nanofibre/rubbery epoxy composites for electronic packaging applications Original Research Article

Vapour grown carbon nanofibre (VGCNF)/rubbery epoxy (RE) composites were produced, by either mechanical mixing, three-roll milling (RM) or combined ultrasonication/mechanical mixing. Incorporation of VGCNFs resulted in significant enhancements in the thermal and electrical conductivities of the material. Appropriate selection of processing technique and parameters can help to maximise the potential of VGCNF additions by improving their dispersion in the matrix. The composites produced by RM have superior transport properties compared with those produced by other techniques. The thermal conductivity of such composites at 40 wt.% VGCNFs reached 1.845 W/m K, a 10-fold increase compared to RE alone. The thermal conductivity data of VGCNF/RE composites best fits to the Hatta–Taya model. The lowest electrical percolation threshold is at 2 wt.%, obtained for composites produced by RM. The thermal conductivity of VGCNF/glassy epoxy (GE) composites at 12 wt.% is 10% lower than the corresponding RE composite but its electrical conductivity is 2 orders of magnitude higher than the corresponding RE composite. VGCNFs at 40 wt.% increase the compressive strength of rubbery epoxy by ∼5× but the compressive modulus of 40 wt.% VGCNF/RE composite is 12 times lower than that of 12 wt.% VGCNF/GE composite, demonstrating highly compliant nature of RE composites.