Explaining absence of texture development in cold rolled two-phase Zr–2.5 wt% Nb alloy Original Research Article

In the present study, two distinct starting microstructures of Zr–2.5 wt% Nb have been used: (1) single-phase α hcp martensitic structure; and (2) two-phase, 10% bcc β and rest hcp α, Widmanstätten structure. In the second case, two types of α were present—near grain boundary predominantly single-phase α (about 5% of the total α) and α plates in an apparently continuous β matrix. Both (1) and (2) had similar starting crystallographic texture of the hcp α phase and were deformed by unidirectional and cross rolling. In the two-phase structure the changes in the bulk texture on cold rolling was found to be insignificant, while in the single-phase material noticeable textural changes were observed. Taylor type deformation texture models predicted textural changes in single-phase structure but failed to predict the observed lack of textural development in the two-phase material. Microtexture observations showed that α plates remained approximately single crystalline after cold rolling, while the β matrix underwent significant orientational changes. Relative hardening, estimated by X-ray peak broadening, was observed mainly in β phase; while aspect ratio of α plates remained unchanged with cold rolling—indicating absence of effective macroscopic strain in the hcp α plates. Based on microstructural and microtextural observations, a simple model is proposed in which the plastic flow is mainly confined to the β matrix within which the α plates are subjected to ‘in-plane rigid body rotation’. The model explains the observed lack of textural developments in the two-phase structure.