Effects of size on the mechanical response of metallic glasses investigated through in situ TEM bending and compression experiments Original Research Article

Quantitative bending and compression tests on micropillars made of two different amorphous alloys, with tip diameters ranging from 93 to 645 nm, are performed in situ in a transmission electron microscope (TEM). Under microcompression each pillar shows an intermittent plastic flow accommodated by inhomogeneous shear banding. However, the individual shear banding events are strongly size-dependent, i.e. in larger pillars the deformation is controlled by nucleation of shear bands, but in smaller pillars it becomes propagation-controlled. On the other hand, the yield stress is essentially size-independent. Microbending tests show further advantages by amplifying size effects and minimizing artifacts. An interesting finding is that by microbending, a switch from highly inhomogeneous to fully homogeneous deformation is observed at an experimentally accessible size regime near 200 nm, whereas it is not accessible under microcompression, even at a sub-100 nm scale. These size effects are well interpreted by a micromechanical model, leading to a deformation map in the stress-size space. A physical picture of nanoscale shear localization process is also provided.