Electrical conductivity and Young’s modulus of flexible nanocomposites made by metal-ion implantation of polydimethylsiloxane: The relationship between nanostructure and macroscopic properties Original Research Article

The mechanical and electrical properties of nanocomposites created by gold and titanium implantation into polydimethysiloxane (PDMS) are reported for doses from 1015 to 5 × 1016 at. cm−2, and for ion energies of 2.5, 5 and 10 keV. Transmission electron microscopy (TEM) cross-section micrographs allowed detailed microstructural analysis of the implanted layers. Gold ions penetrate up to 30 nm and form crystalline nanoparticles whose size increases with ion dose and energy. Titanium forms a nearly homogeneous amorphous composite with the PDMS up to 18 nm thick. Using TEM micrographs, the metal volume fraction of the composite was accurately determined, allowing both electrical conductivity and Young’s modulus to be plotted vs. the volume fraction, enabling quantitative use of percolation theory for nanocomposites <30 nm thick. This allows the composite’s Young’s modulus and conductivity to be linked directly to the implantation parameters and volume fraction. Electrical and mechanical properties were measured on the same nanocomposite samples, and different percolation thresholds and exponents were found, showing that, while percolation explains both conduction and stiffness of the composite very well, the interaction between metal nanoparticles occurs differently in determining mechanical and electrical properties.