Crack path evaluation on HC and BCC microstructures under multiaxial cyclic loading

In this paper the multiaxial loading path effect on the fatigue crack initiation, fatigue life and fracture surface topology are evaluated for two different crystallographic microstructures (bcc and hc): high strength low-alloy 42CrMo4 steel and the extruded Mg alloy AZ31B-F, respectively. A series of multiaxial loading paths were carried out in load control, smooth specimens were used. Experimental fatigue life and fractographic results were analyzed to depict the mechanical behavior regarding the different microstructures. A theoretical analysis was performed with various critical plane models such as the Fatemi–Socie, SWT and Liu in order to correlate the theoretical estimations with the experimental data. A new approach based on maximum stress concentration factors is proposed to estimate the crack initiation plane, estimations from this new approach were compared with the measured ones with acceptable results. To implement this new approach a virtual micro-notch was considered using FEM. Moreover, the multiaxial loading path effect on stress concentration factors is also studied. The obtained results clearly show the effect of the applied load conditions on local microstructures response.