Recommended values for the thermal conductivity of aluminium of different purities in the cryogenic to room temperature range, and a comparison with copper Original Research Article

The thermal conductivity of pure aluminium at cryogenic temperatures varies by many orders of magnitude depending on purity and treatment, and there is little information in the literature on the likely values to be obtained for samples of a given purity. A compilation of measurements from the literature has been assembled and used to provide recommended ranges of values for aluminium of different purities (4N, 5N and 6N) in the normal (non superconducting) state. The number of direct thermal conductivity measurements is too limited to be used alone. Electrical resistivity measurements have thus also been used by converting to thermal conductivity using the Wiedemann–Franz law, which is shown to be valid. Since low temperature measurements can easily be extrapolated to higher temperatures, the results cover the range from 1.2 K (the superconducting transition temperature) to room temperature. Values for 5N purity copper have also been examined in a similar manner, to allow a comparison between the two materials. The main application of these results is in the design of cryogenic thermal links; a discussion of the advantages and disadvantages of both materials for this use is given. The use of silver is also investigated briefly. Trends in the behaviour of the conductivity of aluminium in the superconducting state (to temperatures as low as 50 mK) are also discussed.