A comparative experimental study of machining characteristics in vibratory, rotary and vibro-rotary electro-discharge machining

This paper compares the effects of high- and low-frequency forced axial vibration of the electrode, rotation of the electrode, and combinations of these methods in respect of material removal rate (MRR), tool wear rate and surface roughness in die sinking electro-discharge machining (EDM) with a flat electrode (planing mode). The results of the combined states of rotation and vibration at high and low frequency (vibro-rotary EDM) are compared in order to establish which combinations are most appropriate to different machining regimes (finishing, semi-finishing and roughing). It is found that the combination of high-frequency vibration and rotation of the electrode is effective in attaining a high MRR at a specified surface roughness (Ra). This case is modelled by stepwise linear regression. The significant parameters are found by analysis of variance (ANOVA) and the optimum machining parameter settings are obtained using overlay contour plots. The advantages of vibration and rotation are seen to combine in this new process when employed for die sinking EDM with a flat electrode.