A study on micro-hole machining of polycrystalline diamond by micro-electrical discharge machining

Polycrystalline diamond (PCD), with its superior wear and corrosion resistance, is an ideal material for micro-hole parts in the field of microfabrication. This study investigated the micro-hole machining performance for PCDs by micro-electrical discharge machining (micro-EDM). A series of experiments were carried out to investigate the proper machining polarity and the impacts of micro-EDM parameters on machining performance. Experimental results indicate that negative polarity machining is suitable for micro-EDM of PCDs because of the protection brought over by the adhesion sticking to the electrode. An appropriate volume of adhesion on the tool electrode can help to increase the material removal rate (MRR) and reduce the relative tool wear ratio (TWR). By contrast, an excessive volume of adhesion can lead the machining into a vicious circle in which micro-holes are drilled with overlarge diameters. An optimal set of machining conditions was chosen among the investigated ranges of nominal capacitance and electrode rotation speed. An exemplary PCD through-hole, machined under the chosen optimal machining conditions, shows satisfactory machining results.