Relationships between in-flight particle characteristics and properties of HVOF sprayed WC-CoCr coatings

Commercially available WC10Co4Cr powder was thermally sprayed by HVOF process. The methane was used as the fuel gas and its flow rate was successively changed as well as the oxygen. The investigation was carried out to determine the influence of operating parameters on the evolution of velocity and temperature of in-flight particles in order to have a better understanding of the interaction between the particle and the flame jet. In relation to the particle characteristics, properties of the sprayed coatings were examined in terms of microstructure, porosity level and microhardness. The results show that the particle velocity and temperature depends strongly on the particle size. The variation of the methane flow rate has a more obvious influence on the velocity and temperature of particles than that of the oxygen. The changes of porosity and microhardness of deposited coatings are discussed corresponding to the variation of fuel and oxygen flow rates.