Syntheses and evaluation of biodegradable multifunctional polymer networks

The biodegradable, injectable and in situ crosslinkable polymer networks based upon di(propylene fumarate)–dimethacrylate (DPFDMA) and polycaprolactone trimethacrylate (PCLTMA), were prepared and characterized. The polymer networks were initiated by photopolymerization. The initial compressive (CS) and diametral tensile strengths (DTS) of the networks materials were determined and used to evaluate the effects of PCLTMA/DPFDMA ratios on the degradation behavior. The networks exhibited initial DTS values ranging from 2.5 to 9.3 MPa and CS values ranging from 1.8 to 146.0 MPa. The increase of PCLTMA in the formulation led to an increase in viscosity and DTS. The degree of conversions and polymerization shrinkage of the resins ranged from 60% to 72% and 5.1% to 6.4%, respectively. After 6 month, PCL300TMA/DPFDMA resins at a ratio of 100/0, 75/25 and 25/75 lost 70%, 87% and 46% of their initial CS, respectively, while PCL900TMA/DPFDMA and PCL300TMA/PCL900TMA resins at 75/25 lost 100% and 83% of their initial CS, respectively.