Synthesis and properties of a novel hyperbranched polyphosphate acrylate applied to UV curable flame retardant coatings

A series of hyperbranched polyphosphate acrylates (HPPAs) being used for UV curable flame retardant coatings were prepared by the reaction of tri(acryloyloxyethyl) phosphate (TAEP) with piperazine at given ratios, and characterized using FTIR, 1H NMR and GPC measurements. HPPA was blended with TAEP in different ratios to obtain a series of UV curable resins. Their maximum photopolymerization rates image and final unsaturation conversion (Pf) in the cured films at the presence of a photofragmenting initiator were investigated. The results showed that the Pf increased along with HPPA content and the pure HPPA has the maximum value of 82.1% in the photo-DSC analysis. The data from dynamic mechanical thermal analysis showed that HPPA has good miscibility with TAEP. The crosslinking density and Tg of the cured film decrease along with the content of HPPA in the blend. The mechanical properties of the cured films were also investigated. Less than 20% HPPA addition improved both the tensile strength and elongation at break without damaging the modulus. The HPPA20TAEP80 film with 20% HPPA addition has the highest tensile strength of 31.7 MPa and an elongation at break two times that of cured TAEP. The flame retardancy of the UV cured films was investigated by the limiting oxygen index (LOI). The cured TAEP/HPPA samples greatly expanded when burning, and the degree of expansion increased along with HPPA content. However, the LOI values decreased from 47.0 to 34.0 along with HPPA content, which can be ascribed to that the flame retardancy of TAEP is mainly acting in the gas phase, whereas HPPA mainly acting in condensed phase, and the gas phase mechanism holds the dominant effect while their blends are burning.