Phase change materials based on low-density polyethylene/paraffin wax blends

Phase change materials, based on low-density polyethylene blended with soft and hard paraffin waxes respectively, were studied in this paper. DSC, DMA, TGA and SEM were employed to determine the structure and properties of the blends. The blends were able to absorb large amounts of heat energy due to melting of paraffin wax, whereas the LDPE matrix kept the material in a compact shape on macroscopic level. The hard paraffin wax was, however, much more miscible with LDPE because of co-crystallization than the soft paraffin wax. LDPE blended with hard paraffin wax degrades in just one step, while blends containing soft paraffin wax degrade in two distinguishable steps. SEM showed completely different morphology for the two paraffin waxes and confirmed the lower miscibility of LDPE and soft paraffin wax. DMA analyses demonstrated the toughening effect of the waxes on the polymer matrix. This technique was also used to follow the thermal expansion as well as the dimensional stability of the samples during thermal cycling. The most visible expansion could be seen in the first cycle, probably due to a totally different thermal history of the sample. With further cycling the dimensions stabilized after two and four cycles for soft and hard paraffin wax, respectively. Controlled force ramp testing on DMA confirmed poor material strength of the blends containing soft wax, especially at temperatures above wax melting.