The acid-catalysed reaction of α-pinene over molybdophosphoric acid immobilised in dense polymeric membranes

The α-pinene hydration to α-terpineol was studied using as catalysts polymeric catalytic membranes consisting of HPMo entrapped in polyvinyl alcohol (PVA) cross-linked with 10, 20 and 30% of succinic acid, and HPMo encaged in USY zeolites dispersed in a polydimethylsiloxane (PDMS) matrix. In the case of HPMo/PVA membranes it was observed that membrane activity increases with the polymer cross-linking, due to the increase in membrane hydrophobicity, up to the limit of the increasingly restrictions to the molecules mobility. The HPMo-USY/PDMS membrane shows a significantly higher activity for pinene hydration, which is even higher than that observed with USY encaged HPMo alone. However, selectivity to α-terpineol (65% at 80% conversion) is slightly lower than that obtained for the HPMo/PVA cross-linked with 20 or 30% of succinic acid (70–75% at 90% conversion). For both catalytic membranes, HPMo/PVA or HPMo-USY/PDMS, the stability is reasonable good and catalyst activity increases in the subsequent uses of the same membrane, probably due to the interaction between retained α-terpineol and the polymer matrix.