Large-scale, hypervelocity, high-fidelity interceptor lethality development in AEDCʹs range G

The hypervelocity ballistic range G at the Arnold Engineering Development Center (AEDC) is extensively used to conduct kinetic energy lethality tests for the Missile Defense Agency (MDA). Over the years, AEDC has continuously responded to the lethality test and evaluation requirements of Ballistic Missile Defense Systems (BMDS) at hypervelocity intercept conditions. Projectiles launched from two-stage light-gas guns experience acceleration loads that are typically orders of magnitude greater than those of the actual missile defense system. These acceleration loads drive design compromises in the projectilesʹ geometry and mass–density distribution necessary to survive the launch environment. A “high-fidelity” projectile with the proper geometry and mass–density distribution would provide a more representative simulation of the flight vehicle kinetic energy release at impact. Prior to the current upgrades, the range G facility provided the capability to launch large projectiles [8-in. (203-mm) diameter] with weights up to 12 kg at launch velocities up to 4 km/s but at acceleration loads near 40 K gʹs. Current upgrades provide for the capability to launch large-scale “higher fidelity” projectiles at the same high velocities but at half the g loads. In addition, AEDC is developing a new technique for controlling the projectile pitch at the point of impact with a simulated target. These unique capabilities will make it possible to obtain more flight-representative lethality data in a ballistic range. This paper describes the upgraded capabilities now in place and continuing plans for further upgrades.