TBA-based freeze/gel casting of porous hydroxyapatite scaffolds

Porous ceramic scaffolds with a controlled “designer” pore structure have been prepared by the freeze/gel casting route using a TBA-based hydroxyapatite slurry system with 20–40 wt.% solid content. The products were characterized in terms of sintered microstructure, together with physical and mechanical properties. After sintering at 1050–1250 °C, the advantages of freeze casting and gel casting appeared in the pore structure and compressive strength of the ceramics, i.e., unidirectional aligned macro-pore channels developed by controlling the solidification direction of the TBA solvent used in the freeze casting together with small diameter (micron sized) isolated pores formed in the dense outer walls of the pore channels when processed by gel casting. The sintered porosity and pore size generally resulted in a high solid loading giving low porosity and small pore size, this leading to higher compressive strengths. The scaffolds obtained exhibited an average porosity and compressive strength in the range 41.9–79.3% and 35.1–2.7 MPa, respectively, depending on the processing conditions used.