Novel glass ceramic foams materials based on red mud

Glass ceramic foams were prepared using red mud and fly ash with added CaCO3 as foaming agents. The aim of the present work was to investigate the possibility of adding red mud, an alkaline leaching waste, in the raw material for the preparation of glass ceramic foams. The results of mineralogical analyses as well as the microscopic examination showed that the use of the red mud affect the mineralogical characteristics and structures of the as produced foams. The influence of amount of red mud on the bulk density and compressive strength of samples was further evaluated. The experimental results showed that relatively low bulk density foams (0.33–0.41 g/cm3) could be obtained by using low sintering temperature (760–840 °C) when the red mud/fly ash ratio does not exceed 40:60. The reduction of sintering temperature or, above all, the reduction of the holding time, was found to limit the coalescence and significantly improve the compressive strength of the foams (0.33–2.74 MPa).