Oxide thickness dependence of plasma charging damage

Charging damage induced in oxides- with thickness ranging from 8.7 to 2.5 nm is investigated. Results of chargeto-breakdown (Qbd) measurements performed on control devices indicate that the polarity dependence increases with decreasing oxide thickness at both room and elevated temperature (180°C) conditions. As the oxide thickness is thinned down below 3 nm, the Qbd becomes very sensitive to the stressing current density and temperature. Experimental results show that severe antenna effect would occur during plasma ashing treatment in devices with gate oxides as thin as 2.6 nm. It is concluded that high stressing current level, negative plasma charging, and high process temperature are key factors responsible for the damage. © 1999 Elsevier Science Ltd. All rights reserved.