Parametric and internal study of the vortex tube using a CFD model

A computational fluid dynamics (CFD) model is used to investigate the energy separation mechanism and flow phenomena within a counter-flow vortex tube. A two-dimensional axi-symmetric CFD model has been developed that exhibits the general behavior expected from a vortex tube. The model results are compared to experimental data obtained from a laboratory vortex tube operated with room temperature compressed air. The CFD model is subsequently used to investigate the internal thermal-fluid processes that are responsible for the vortex tubeʹs temperature separation behavior. The model shows that the vortex tube flow field can be divided into three regions that correspond to: flow that will eventually leave through the hot exit (hot flow region), flow that will eventually leave through the cold exit (cold flow region), and flow that is entrained within the device (re-circulating region). The underlying physical processes are studied by calculating the heat and work transfers through control surfaces defined by the streamlines that separate these regions. It was found that the energy separation exhibited by the vortex tube can be primarily explained by a work transfer caused by a torque produced by viscous shear acting on a rotating control surface that separates the cold flow region and the hot flow region. This work transfer is from the cold region to the hot region whereas the net heat transfer flows in the opposite direction and therefore tends to reduce the temperature separation effect. A parametric study of the effect of varying the diameter and length of the vortex tube is also presented.