Degradation of bond between FRP and RC beams

Beams and slabs externally reinforced with FRP are often in contact with moisture and temperature cycles that reduce the expected durability of the system. Bond degradation is a frequent cause of premature failure of structural elements and environmental conditions are known to relate to such failures. The study shows the effects of cycles of salt fog, temperature and moisture as well as immersion in salt water on the bending response of beams externally reinforced with GFRP or CFRP, especially on bond between FRP reinforcement and concrete. Temperature cycles (−10 °C; 10 °C) and moisture cycles were associated with failure in the concrete substrate, while salt fog cycles originated failure at the interface concrete–adhesive. Immersion in salt water and salt fog caused considerable degradation of bond between the GFRP strips and concrete. However, immersion did not lower the load carrying capacity of beams, unlike temperature cycles (−10 °C; 10 °C) that caused considerable loss. No significant differences were detected on the behavior of the systems strengthened with GFRP and CFRP, perhaps because the design of the tests impeded failure of the fibres.