Asymmetric membranes with modified gold films as selective gates for metal ion separations

Thin layers of gold (700 Å) were deposited on manufactured alumina pourous supports to yield nanopores with openings of <7 nm. A self-assembled monolayer (SAM) of alkyl thiols was then attached to provide a hydrophobic support for trialkyl phosphine oxide-based metal ion carriers. The resulting gated membranes provided a barrier to ions including H+, and Ca2+, NO3−, and CH3COO−. When an aqueous feed solution of 4.2 mM uranyl nitrate and 1 M lithium nitrate pH 4, and a receiving solution of 1 M sodium acetate pH 5.5 were used 100% of the metal was transported across the membrane by facilitated transport via the phosphate or phosphine oxide carrier. The thin gates transported metal ions as neutral nitrate complexes with fluxes high enough to be limited by the alumina support. The flux rates of 200,000 metal ions per pore per second are only a factor of 5 below that observed for the potassium channel. High selectivity of U over Eu is observed until the [U] is <0.84 mM in the feed solution, despite the fact the Eu actually transports faster when U is not present. This work demonstrates that selectivity can be added without impeding transport by using thin selective layers.