Fabrication of composite coatings using a combination of electrochemical methods and reaction bonding process

The major difficulty in fabricating ceramic coatings on metal substrates using the electrophoretic deposition process (EPD) is problems caused by the volume shrinkage during the sintering of the green form ceramic coatings produced by EPD. Numerous cracks normally form in the EPD coating during sintering. In this work, we have developed the reaction bonding process to fabricate crack-free and dense ceramic coatings, where the volume shrinkage is compensated by the volume expansion due to the oxidation of aluminium in the green form coatings during sintering in air. Both EPD and electroplating were used here to produce green form coatings which contain aluminium particles and, in some cases, an intermediate nickel layer. During the subsequent heat treatment, melting and oxidation of the metals in the green form coating promote densification during sintering. By these means, relatively dense composite coatings have been fabricated on metal substrates.