Densification of nanocrystalline MgO ceramics by hot-pressing

Densification of pure nanocrystalline MgO powder with 10 nm particle size by hot-pressing was investigated in the temperature range 700–800 °C, applied pressure range 100–200 MPa, and for durations of up to 240 min. It was shown that significant densification under the pressure begins above 440 °C. Densities higher than 99.5% with grain size of 73 nm were achieved at 790 °C and 150 MPa for a 30 min duration. Remarkable densification from 90 to 99.5% was observed by temperature change from 700 to 790 °C, for which the grain size was doubled only. The final grain size decreased with increasing the applied pressure. Higher shrinkage rates and cumulative shrinkages were recorded by the application of pressure at 550 °C rather than from room temperature. The temperature at which the pressure was applied is crucial in determining the maximum shrinkage rate in the nanocrystalline compacts. This effect was related to the morphological changes of the particles caused by plastic deformation at lower temperatures. Analysis of the densification rate and its comparison to the literature data was in agreement with Coble creep, where self-diffusion of Mg2+ cations along the grain boundaries acts as a main densification mechanism.