X-ray single phase LSGM at 1350 °C

Synthesis of X-ray-phase-pure (La1−xSrxGa1−yMgyO3−δ, LSGM, where x = 0.1, y = 0.15 and 0.17) powders were achieved at temperatures as low as 1350 °C via organic precursor method using tartaric acid as the carrier material. LSGM materials were characterized for their phase purity, crystallization and electrical properties. Pellets sintered at 1350 °C for 6 h were single phase and dense (>99%). Electron microscopy analysis of X-ray single-phase pellets revealed MgO precipitates with sizes ranging from 50–300 nm. Phase formation and distribution in this complicated multi-cation-oxide system as a function of temperature were reported and discussed. Amorphous LSGM first crystallizes at 625 °C. However, elimination of undesired phases require higher temperatures. Impedance measurements as a function of temperature up to 545 °C revealed that the X-ray phase pure pellets may have extrapolated ionic conductivity values as high as 0.14–0.16 S/cm at 800 °C. Possible implications of limited MgO solubility on the ionic conductivity are presented.