Mechanical and tribological properties of vapour deposited low friction coatings on Ni plated substrates

Soft steel and aluminium substrates with load-carrying layers of electroplated nickel were coated with commercially available low friction vapour deposited coatings. The mechanical and tribological properties of the coating and substrate composites were evaluated with special emphasis on the influence of the nickel layer. Two different thicknesses of the intermediate load-carrying nickel layer were tested. The samples were evaluated regarding friction and sliding wear, abrasive wear, hardness and elastic modulus, morphology and coating thickness and adhesion between substrate and coating. It was found that all the evaluated low friction coatings were possible to be successfully deposited on the intermediate nickel layer. A relatively thick intermediate nickel layer is a promising candidate for improvement of the load-carrying capacity.