Tribological properties of plasma sprayed and laser remelted 75/25 Cr3C2/NiCr coatings

A CO2 laser was used to fuse based Ni–Cr Cr3C2 coatings for the purpose of homogenizing their microstructures and eliminating their porosity. Tests of layer control and wear resistance were carried out on the samples treated with the laser. The results have shown that laser remelting improves the microstructure of the coatings, increases the coating microhardness, and improves coating–substrate adherence. The dry sliding wear behaviour was characterized by the existence of two periods. During the first period the square of the wear volume is proportional to the sliding distance. During the second, the wear volume is proportional to the sliding distance.