Physical and tribological properties of PTFE micropowder-filled EPDM rubber

The physical and tribological properties of ethylene–propylene–diene–rubber (EPDM) filled with polytetrafluoroethylene (PTFE) micropowders, i.e. MP1100 and MP1200 having chemically similar but distinctive microstructural morphology have been investigated. EPDM–PTFE micropowder blends filled with MP1200 having a solid granular structure, showed poor tensile strength and elongation at break but significantly improved tribological properties. It attained both the lowest steady-state friction coefficient and specific wear rate. However, EPDM–PTFE blends containing a fine agglomerated PTFE micropowder of MP1100 showed enhanced physical properties. Its increasing tensile strength and elongation at break with PTFE micropowder loading compared to MP1200-filled EPDM blend was essentially due to its characteristic morphology, which enhanced its dispersion and compatibility with EPDM. It showed specific wear rate similar to MP1200-filled EPDM but resulted in high friction coefficient. Scanning electron microscopy (SEM) of the PTFE micropowders and the corresponding PTFE micropowder-filled EPDM blends suggest that agglomerates morphology, dispersion and interfacial compatibility with EPDM are the key factors influencing physical and tribological properties of these compounds.