Numerical prediction of flow and mixing characteristics in CVCS chemical addition system

A numerical result of the flow and mixing characteristics is presented for the flow field created by water injected into a cylindrical tank with an initially stationary fluid. The flow is relevant to the operation of the chemical addition system in the chemical and volume control system (CVCS) of nuclear power plants. This study was undertaken to provide a basis for modification of the previous design which gave a number of difficulties in installation and operation of the chemical addition system because it needs a special reciprocating pump with a high actual head. For the tank of length-to-diameter ratios (L/D) of 1, 2 and 3, each with and without a baffle inside, calculation results were obtained by solving the unsteady laminar two-dimensional elliptic forms of governing equations for the mass, momentum and species concentration. Finite-difference method was used to obtain discretization equations, and the SIMPLER solution algorithm was employed for the calculation procedure. Results showed that the baffle was very effective in enhancing the mixing in the tank, and that a baffle should be installed near the tank entrance in order to inject chemicals into the reactor coolant system (RCS) within the operating time required. © 1999 Elsevier Science S.A. All rights reserved.