Effect of tool stiffness upon tool wear in high spindle speed milling using small ball end mill

Longer tool life can be tentatively achieved at a higher feed rate using a small ball end mill in high spindle speed milling (over several tens of thousands of revolutions per minute), although the mechanism by which tool life is improved has not yet been clarified. In the present paper, the mechanism of tool wear is investigated with respect to the deviation in cutting force and the deflection of a ball end mill with two cutting edges. The vector loci of the cutting forces are shown to correlate strongly with wear on both cutting edges of ball end mills having various tool stiffnesses related to the tool length. The results clarified that tool life can be prolonged by reducing tool stiffness, because the cutting forces are balanced, resulting in even tool wear on both cutting edges as tool stiffness is lowered to almost the breakage limit of the end mill. A ball end mill with an optimal tool length showed significant improvement in tool life in the milling of forging die models.