Title of article :
Inkjet-printed sol–gel films containing metal phthalocyanines/porphyrins for opto-electronic nose applications
Author/Authors :
Mensing، نويسنده , , Johannes Ph. and Wisitsoraat، نويسنده , , Anurat and Tuantranont، نويسنده , , Adisorn and Kerdcharoen، نويسنده , , Teerakiat، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 2013
Pages :
9
From page :
428
To page :
436
Abstract :
In this work, five metal porphyrins and phthalocyanines embedded in transparent sol–gel films were deposited by piezoelectric inkjet printing, characterized and used as gas sensors. Explored compounds include magnesium/manganese(III) chloride/zinc 5,10,15,20-tetraphenyl-21H,23H-porphyrin, magnesium 2,3,7,8,12,13,17,18-octaethyl-21H,23H-porphine, and zinc 2,9,16,23-tetratertbutyl-29H,31H-phthalocyanine. Porphyrin/Phthalocyanine was blended with sol–gel solution to produce inks that were printed on glass substrates. The printed films were used as sensing layers for discrimination of volatile organic compounds (VOCs). Printed films were characterized by UV/vis spectroscopy, FTIR spectroscopy, and scanning electron microscopy. The employed sensing compounds are promising materials for optical gas sensors due to selective spectral alterations when exposed to oxidizing and reducing gases as well as VOCs. These alterations were observed by UV/vis spectroscopy and used to distinguish between several VOCs. To do so, a single printed sensing layer was exposed to methanol, ethanol, acetone and isopropanol vapor, respectively. During exposure the absorbance spectrum was continually measured and split into several wavelength intervals. By calculating the area integral of each interval and considering these as separate sensors it is possible to use a single sensing film to emulate sensor arrays. The results showed that the fabricated layers exhibit reversible optical modulations in the UV/vis spectra when exposed to various VOCs. The data have been analyzed by principal component analysis (PCA) and cluster analysis (CA). Results demonstrate the analytes to be distinguishable as isolated clusters in the PCA domains. The best results were obtained from ZnTPP and MgTPP containing films, whereas layers doped with Mn(III)ClTPP give unusable response.
Keywords :
Optical gas sensing , inkjet printing , Metallo phthalocyanine , Sol–gel method , Metallo porphyrin
Journal title :
Sensors and Actuators B: Chemical
Serial Year :
2013
Journal title :
Sensors and Actuators B: Chemical
Record number :
1441282
Link To Document :
بازگشت