Electrochemical characterization of a bioceramic material: The shell of the Eastern oyster Crassostrea virginica

The shell of the Eastern oyster (Crassostrea virginica) is composed of multiple incongruent mineralized layers. This bioceramic composite material was investigated to determine the effects of shell thickness, orientation and layer composition on its electrochemical behavior using electrochemical impedance spectroscopy, potentiodynamic polarization and scanning electron microscopy-energy dispersive spectroscopy. SEM-EDS analysis of the oyster shell revealed that the multilayered biocomposite material is composed of calcium carbonate (CaCO3). EIS measurements in 3.5 wt.% NaCl indicated that the impedance of the whole oyster shell in the low frequency region exhibited high impedance values which exhibited a decreasing trend with increasing immersion time. In terms of overall shell thickness, limiting currents measured by potentiodynamic techniques through the shell were observed to increase when the outer layers of the shell were sequentially removed by grinding, thus decreasing the shell thickness. These limiting current values remained relatively constant when the inner layers of the shell were removed. The impedance values of the oyster shell material as measured by EIS were shown to decrease with decreasing shell thickness. These findings suggest that the prismatic (outermost) shell layer in combination with the soluble organic matrix between all shell layers may influence the ionic conductivity through the oyster shell.