NH3 oxidation catalysed by calcined limestone—a kinetic study

The oxidation of NH3 catalysed by calcined limestone was studied in a small fixed bed reactor at fluidized bed combustion temperatures (750–950 °C) using three types of limestones: Faxe Bryozo, Stevns Chalk and Ignaberga. It was shown that the limestones are very active catalysts for the oxidation of NH3. Experiments were carried out with O2 concentrations between 0 and 4.5 vol%. At low O2 concentrations (<1 vol%), a strong increase in the NH3 oxidation rate was observed with increasing O2 concentration. At O2 concentrations above 1 vol% no further effect of increasing the O2 concentration was observed. lectivity for NO formation found in most experiments is about 0.65–0.70 for all limestones used when the O2 concentration is above 0.5 vol%. This means that the oxidation of NH3 to NO is about two times faster than the oxidation to N2. Below 0.5 vol% O2, the selectivity for NO decreases with decreasing O2 concentration. The selectivity for NO is not influenced by inlet concentrations of NH3 or NO. perimental observations are explained by a reaction scheme initially proposed by de Soete [Proc. of the 5th International Workshop on Nitrous Oxide Emissions, 1992] and modified in this study. periments showed that the NH3 oxidation is first order in NH3 and that the reaction rate is not influenced by NO. The influence of O2 is modelled by a Langmuir model for O2 adsorption on the CaO surface. Based on the kinetic model, reaction rate expressions for NH3 oxidation to NO and N2 were obtained from the experimental data. To our knowledge, this is the first time that validated reaction rate expressions, which can describe the NH3 oxidation over calcined limestone over a broad O2 range and a broad temperature range, are reported in the literature. The kinetics obtained in this work may be used to improve the modelling of NO emissions from fluidized bed combustors.