Effect of steam injection on pore structure and distribution in coke samples produced by delayed coking☆

Porous structure of the petroleum coke produced in delayed coking technique is investigated by high-resolution X-ray computed tomography imaging. Cokes analyzed for these studies were produced from decant oil with and without steam injection. Images taken at different regions along the length of the coke columns have been used to characterize and quantify porosity and pore size (>20 μm)/shape distribution within the coke samples. Fractal analysis was performed to investigate the pore complexity distribution within the coke and to compare the two coke samples produced by different methods. High-resolution X-ray computed tomography was utilized also to scan a 1.1 cm section in the middle of the steam treated coke in volume mode to scan 80 images in one scan. Multi-planar reconstruction and 3D rendering of the pores were used to understand how the flow channels are developed and the degree of connectivity. s showed that each coke sample shows a wide range of pore sizes and shapes that vary along the length of the coke samples. This variation in the coke that is not subjected to steam is more pronounced. Quantification of macropore size distribution shows that, in each coke sample the middle sections are the most similar regions in terms of pore size distribution and porosity. In general, steam injected coke has larger pores. Box counting fractal analysis in the cokes shows that pore distribution has fractal scaling at the locations scanned and helps in the interpretation of the pores at different locations in terms of their complexity in the distribution and shapes.