Combustion and performance of a diesel engine with preheated Jatropha curcas oil using waste heat from exhaust gas

The viscosity and density of CJO (crude Jatropha oil) were reduced by heating it using the heat from exhaust gas of a diesel engine with an appropriately designed helical coil heat exchanger. Experiments were conducted to evaluate the combustion characteristics of a DI (direct injection) diesel engine using PJO (preheated Jatropha oil). It exhibited a marginally higher cylinder gas pressure, rate of pressure rise and heat release rate as compared to HSD (high speed diesel) during the initial stages of combustion for all engine loadings. Ignition delay was shorter for PJO as compared to HSD. The results also indicated that BSFC (brake specific fuel consumption) and EGT (exhaust gas temperature) increased while BTE (brake thermal efficiency) decreased with PJO as compared to HSD for all engine loadings. The reductions in CO2 (carbon dioxide), HC (hydrocarbon) and NOx (nitrous oxide) emissions were observed for PJO along with increased CO (carbon monoxide) emission as compared to those of HSD.