Controlled-cycle pulsed liquid–liquid chromatography. A modified version of Craigʹs counter-current distribution

A new liquid–liquid chromatography technique developed from a combination of controlled-cycle operation and a pulsed-mixing technique is suggested and validated. The controlled-cycle pulsed liquid–liquid chromatography (CPLC) system operates without involving a centrifuge and consists, of a series of multistage units, and a method for imparting pulsation motion to the liquids inside the units (the pulsation cycle). This chromatography technique can be considered as an improved continuous form of Craigʹs counter-current distribution method, or, alternatively, as a form of droplet chromatography with the cycling mode of operation. The theoretical model has been designed to account for the effects of the basic parameters influencing the CPLC operation. The theoretical modelʹs suitability was proved by direct comparison between the experimental and model responses. The CPLC devices containing 1, 2, 4 and 5 multistage columns (each column was divided into 26 stages) have been designed, fabricated and tested; experiments were conducted to test the chromatographic behavior of organic (monocarboxylic) and mineral acids. The mass transfer rate in the stages depends on the nature of both—phase and sample systems: the highest values were achieved in experiments with acetic acid by using the octane/water biphasic system, where an equilibrium concentration distribution between stationary and mobile phases in the stages was attained. The results obtained demonstrated the potential of the new technique for preparative and industrial scale separations.