Automated headspace solid-phase dynamic extraction for the determination of amphetamines and synthetic designer drugs in hair samples

The technique of automated headspace solid-phase dynamic extraction (SPDE) coupled with gas chromatography–mass spectrometry was evaluated for the determination of amphetamines and synthetic designer drugs in hair samples. Headspace SPDE is a novel method for the solventless extraction of organic compounds in aqueous samples. In a so-called inside needle capillary absorption trap a hollow needle with an internal coating of polydimethylsiloxane is used as extraction and preconcentration medium. Sampling is performed on the solution headspace by passing the gas through the device actively by a syringe. Analytes present in the sample are sorbed onto the deposited stationary phase. The syringe needle is placed into the injection port of a GC and rapid heating of the metal needle induces the desorption of analytes. For the determination of amphetamine, methamphetamine, 3,4-methylendioxyamphetamine (MDA), 3,4-methylendioxymethamphetamine, 3,4-methylendioxyethylamphetamine (MDEA), 3,4-methylendioxyphenyl-2-butanamine and N-methyl-1-(3,4-methylendioxyphenyl)-2-butanamine in human hair samples, 10 mg of hair were hydrolysed with sodium hydroxide. After absorption of analytes for an on-coating derivatization procedure the SPDE needle was directly placed into the headspace of a second vial containing N-methyl-bis(trifluoroacetamide). A validation procedure revealed absolute analyte recoveries between 10.2 and 16.7%. Linearity was obtained from 0.1 to 20 ng/mg with coefficients of correlation between 0.992 and 0.999. Intra- and inter-day precision were determined at two different concentrations and resulted in ranges between 1.4 and 4.1% (intra-day) and 4.2–14.6% (inter-day). Limits of detection between 0.03 ng/mg (MDA) and 0.19 ng/mg (MDEA) were achieved. Results indicated that SPDE is a rapid and sensitive method for the analysis of biological samples. Compared to solid-phase microextraction we found a higher extraction rate coupled with a faster automated operation.