Title of article :
Separation of 7-xylosyl-10-deacetyl paclitaxel and 10-deacetylbaccatin III from the remainder extracts free of paclitaxel using macroporous resins
Author/Authors :
Fu، نويسنده , , Yujie and Zu، نويسنده , , Yuangang and Li، نويسنده , , Shuangming and Sun، نويسنده , , Rui and Efferth، نويسنده , , Thomas and Liu، نويسنده , , Wei and Jiang، نويسنده , , Shougang and Luo، نويسنده , , Hao and Wang، نويسنده , , Ying، نويسنده ,
Issue Information :
روزنامه با شماره پیاپی سال 2008
Pages :
10
From page :
77
To page :
86
Abstract :
The separation and enrichment of 10-deacetylbaccatin III (10-DAB III) and 7-xylosyl-10-deacetyl paclitaxel were studied on seven macroporous resins with special structures. The performance of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III on macroporous resins including AB-8, ADS-17, ADS-21, ADS-31, ADS-8, H1020 and NKA-II was compared according to their adsorption and desorption properties. AB-8 provided a much higher adsorption capacity for 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III than other resins, and its adsorption data fitted well to the Langmuir and Freundlich isotherm. According to the adsorption and desorption capacities and the adsorption isotherms, AB-8 demonstrated a remarkable capability for the preparative separation of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III from the remainder extracts free of paclitaxel. In order to optimize parameters of separation, dynamic adsorption and desorption experiments were carried out on the columns packed with AB-8 resin. The optimal conditions were: the processing volume 15 BV; concentrations of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III in feed solution 0.0657 mg/mL and 0.1494 mg/mL; flow rate 1 mL/min; temperature 35 °C. The gradient elution program was as follows: 30% ethanol for 3 BV, then 80% of ethanol for 6 BV, flow rate 1 mL/min. After the AB-8 resin treatment, the contents of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III in the product had increased from 0.053% and 0.2% to 3.34% and 1.69%, which were 62.43-fold and 8.54-fold of those in the untreated extracts, respectively, and the recoveries of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III were 85.85% and 52.78%. The performance achieved good separation and higher recovery of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III from remainder extracts free of paclitaxel by using AB-8 resin. It is a fast and effective method for the separation and enrichment of 7-xylosyl-10-deacetyl paclitaxel and 10-DAB III.
Keywords :
Separation , Macroporous resins , 10-deacetylbaccatin III , 7-Xylosyl-10-deacetyl paclitaxel
Journal title :
Journal of Chromatography A
Serial Year :
2008
Journal title :
Journal of Chromatography A
Record number :
1523739
Link To Document :
بازگشت