Validation of various extraction techniques for the quantitative analysis of polycyclic aromatic hydrocarbons in sewage sludges using gas chromatography-ion trap mass spectrometry

A new GC-ion trap MS method has been developed for the determination of polycyclic aromatic hydrocarbons (PAHs) in sewage sludge samples. The sludge samples were extracted with Soxhlet, Soxtec, and pressurized liquid extraction (PLE) using 1:1 (v/v) dichloromethane (DCM):n-hexane solvent mixture. A multi-layer clean-up (silica/Al2O3) column were used, followed by gel permeation chromatography (GPC) to eliminate the interfering organic compound as well as the lipids. The extracts were quantified with GC–EI-SIS and GC–EI-MS–MS. The method was successfully applied to determine the concentration of PAHs present in sewage sludge samples collected from four waste water treatment plants (WWTPs). The method recovery values varied from 61.5 to 90.5%, 65.0 to 91.8% and 60.0 to 93.4% for Soxtec extraction, Soxhlet extraction and PLE extraction, respectively. The total concentrations of the 16 PAHs in the sewage sludge samples were found to vary from 1.56 to 6.18 mg/kg. The concentration of PAHs in WWTPs did not significantly vary.